Where to fly rc quadcopter
How to Fly a Quadcopter/Drone (Basic Tutorial)
okay here's a small tutorial about
flying the quadcopter
a basic level tutorial for example this
one is the transmitter it looks like
this the transmitter of the quadcopter
it's moving all around the right stick
is moving all around also okay and this
is the quadcopter itself it's a syma x5c
these are the propellers it has four
propellers so that's why it's a quad
copter quad means four okay and let's
start with some basic things so here on
the transmitter on this one we have the
left stick which is moving all around we
have the right stick that one's moving
all around also these butters are for
making some corrections the other
buttons also exactly on this model this
one is for making photos and videos but
the onboard camera is removed this is
the battery of the quadcopter it's a
small battery okay and this one has also
batteries here for double-a batteries
okay so both of them are electric
devices and let's start with some basic
things for example this stick on the
left side as you can see it's freely
moving up and down but this one is
spring-loaded it comes back to the
initial position this one comes back on
the horizontal direction but it won't
come back on the vertical direction and
that's because this one up and down is
controlling the height of the quadcopter
so if you raise this one this joystick
up for example like there then the
quadcopter will go higher if you
lower it then it will go lower so this
is for going up and this is for going
down up in the air and down to the
ground okay you can move this one to the
left or to the right that one left and
right is for turning left or turning
right so if I move this one the joystick
to the left like so then it will
continuously turn to the left if I let
it over it will not turn if I move it to
the right then it will turn to the right
continuously until the joystick this
stick is released okay so that's up
going up going down turning left and
learning right okay you can combine
these movements also so you can turn to
the left while going up or while
descending so in this position I'm
descending and turning I'm going up and
turning to the left
same here I'm turning to the right and
going up turning to the right and
descending going down okay let's go to
this joystick this joystick is for
example the left and right movement is
for inclining the quadcopter
so it will turn this way and it will go
that way to the right and if I move it
to the left then it will tilt this way
and it will go to the left that way so
just stick to the right it will go to
the right in a linear direction just
stick to the left it will go that way in
a linear direction the same thing with
going ahead that we are tilted that way
and go
head that way forward if I move the
joystick towards me down then it will
turn this way it will come towards me so
left right forward and backward okay if
I talked about forward and backward that
is forward and backward then we can see
I painted this quadcopter the propellers
were not black it's black because I
wanted to make a distinguishing the
black is the rear part and the white
propellers are the front part of the
quadcopter so if I move let's stick a
head up then it will go that way but if
it's this way and I move it up then it
won't go that way because this is the
head the white one and forward is this
way the quadcopter does not have a
headless mode in headless mode the
quadcopter would always go towards the
transmitter for example if I pull the
stick down then it will come towards me
whether this one is the front and that's
the end or this the front and that's the
end but since this quadcopter does not
have headless mode if I position it this
way then the front is to the left and
the back is to the right if I command it
to go ahead then a head for him is this
way because the white propellers are
here if it's that way and I press the
head then a head is that way so you must
know the direction of the quadcopter and
for that we have some LEDs here the red
LEDs are the front and the green LEDs
are the back so you can see even lower
light condition also the plastic fell
off from here okay enough talking let's
get to some action I won't fly high
because it's very windy and this is very
light and when we blow it away so since
there are electric devices I have to
turn on the transmitter this is the on
button I have to turn on the quadcopter
also that's it it's blinking blinking
that means that it's not bound to the
transmitter not yet so if I move any of
the joysticks it won't do anything
unless this one is moved up and down now
it's bound and when it's bound this
quadcopter is not flashing the LEDs is
constantly on okay so this one controls
the height so that's for going up and
going down if I don't move it
then it's spinning constantly
okay done
so it's windy out here that's why I
don't want to fly it okay and let's move
it to the right I mean left notice that
it's not doing anything until you give
it some thrust that is spin up the
propellers from this one what is the
moment
ouch okay so and I tweet care spinning
propellers at high speed will cause
damage so once again some speed and
notice the directions it's moving that
way
now to the left
oops
that's fighting the wind the constantly
had to correct it oops okay if the wind
blows the way then better get it down
turn off this one when it's turned off
then it loses the signal from the
transmitter it's blinking you can turn
off this one also
and that's it for this basic tutorial
thanks for watching
you
